Re: ZEDIT problem

From: Red Wolf (
Date: 02/21/99

Hrm.. Well i took the advice and checked out the zedit.c in olc+ and they were
pretty much identical minus the triggers.
Not much more to go on.

Tony Robbins wrote:

> *snip*
> >This wasnt a problem when i patched the percentages into bpl11 with oasis95
> >thou. Has it changed that much? I also noticed that when I tried to set a
> door
> >as locked it doesnt even ask me to save it just cancels. The solution still
> >applies? And where is it setting a arg5 I dont see any.
> *snip*
> >> Actually, you're both partly right.  You see, the percentage loads OLC
> patch
> >> sets up an arg5 I believe in ZEDIT.  Now, when you make a choice in
> >> the prompt for information comes from the calling function, e.g.,
> >> zedit_disp_arg*_menu().  However, the event handler actually sets it.
> >> Therefore, if there's no case handler to set the values in the event
> >> handler, it won't do anything.
> >>
> >> I had a similar problem when I incorporated percentage loads into OLC+
> >> v2.1a.  It seems that there's a similar region in Oasis that the patch
> hits,
> >> instead of its actual target.  Go back to your original zedit and
> handpatch,
> >> and I think you'll have more success.
> Hrm, ok, I remember it either adds arg3, arg4, or both in the patch.
> Basically, I hand patched it to make sure things made sense, and it worked.
> In bpl14, with OasisOLC 1.6b, I had the same problem as you.  Make sure
> they're all flowing properly.  Look at the zedit.c file that is included in
> OLC+ 2.1a for a working copy.  I think.
> Sorry I'm not more helpful
> -B.
>      +------------------------------------------------------------+
>      | Ensure that you have read the CircleMUD Mailing List FAQ:  |
>      |  |
>      +------------------------------------------------------------+

     | Ensure that you have read the CircleMUD Mailing List FAQ:  |
     |  |

This archive was generated by hypermail 2b30 : 12/15/00 PST