I've seen that before. Either there are doors set to '0', or you have
missed a door setting in either REDIT or ZEDIT, assuming you are using
Oasis like we do. Go to the zone files and open 70.zon, scroll down to
lines 19 and 20, and you can see which room it's in.
With Oasis, you HAVE to set your doors in both REDIT and ZEDIT or you get
those errors.
Good luck!
- Rick
At 01:59 PM 9/7/99 +0200, you wrote:
>Hi all
>
>i have bpl15 and when ever a zone resets or
>when the mud starts up i get this for almost every area
>
>Sep 7 12:56:31 :: SYSERR: EQUIP: Obj is in_room when equip.
>
>i also found a whole stax of theses error's
>
>Sep 7 12:50:51 :: SYSERR: zone file: door does not exist, command disabled
>Sep 7 12:50:51 :: SYSERR: ...offending cmd: 'D' cmd in zone #70, line 19
>Sep 7 12:50:51 :: SYSERR: zone file: door does not exist, command disabled
>Sep 7 12:50:51 :: SYSERR: ...offending cmd: 'D' cmd in zone #70, line 20
>Sep 7 12:51:01 :: SYSERR: zone file: door does not exist, command disabled
>Sep 7 12:51:01 :: SYSERR: ...offending cmd: 'D' cmd in zone #186, line 50
>Sep 7 12:51:01 :: SYSERR: zone file: door does not exist, command disabled
>
>anyone got any ideas ?
>i have added DGscripts which i thing patch fine i had no errors or log files
>
>Thanks
>
>
> +------------------------------------------------------------+
> | Ensure that you have read the CircleMUD Mailing List FAQ: |
> | http://qsilver.queensu.ca/~fletchra/Circle/list-faq.html |
> +------------------------------------------------------------+
>
+------------------------------------------------------------+
| Ensure that you have read the CircleMUD Mailing List FAQ: |
| http://qsilver.queensu.ca/~fletchra/Circle/list-faq.html |
+------------------------------------------------------------+
This archive was generated by hypermail 2b30 : 12/15/00 PST